LED high pole lamp main pole: High pole lamp main poles with a height of more than 20 meters are usually made of steel with a wall thickness of 5.6 mm. The solid level is not inferior to the solidity of the whole board. After the overall welding of the led high-pole lamp is completed, the hot-dip galvanizing treatment must be stopped on the inner and outer surface layers. The zinc process must not achieve this effect, but after all, the steel wall thickness is above 5mm. Even if it is rusted, it will not rust if it is not ten or twenty years old, so the main pole of the led high pole lamp is basically It won't break unless you plan to change it.
Landing system: Landing system is a core department of led high pole lights. The movement of the lamp panel depends entirely on the landing system. The landing system of led high pole lights is mainly a hoist and wire rope. It can be said that if the wire rope is not bad, the hoist It ca n’t be damaged for decades. Why do you say that, first of all, the hoisting machine is installed in the main pole. The wind and rain will never cause aging of the line. Secondly, the hoisting machine is rarely started. If it is not bad in 10 years, you don't need to use it in that decade. Therefore, it is difficult to make the landing system bad.
Light panel: The effect of the led high-pole lamp light panel is used for loading light sources. The appearance is very diverse, but it is inseparable. No matter how many looks are achieved by bending welding, its solid level is indestructible. Assembling ten and twenty 400-watt low-pressure sodium lamps is at best a big horse-drawn cart—practice makes perfect, and it is difficult to make it bad.
Lamp holder: Let's continue with the lamp holder now. No matter whether the LED lamp holder is the same as the low-pressure sodium lamp, they belong to the product of the electronic paradigm. The electronic products are only known to any layman, but they do not know what they are. It is basically invisible from the surface. The light source is the main symbol of the whole set of high pole lights, because high pole lights are street lights, and the influence of street lights is to illuminate. If a light source is broken, it is equal to a led high pole light, so the choice of light source quality is particularly important. Be sure to choose a genuine brand when setting up the equipment light source.
From the above explanation, we can see that other departments can hardly break apart from the light source, and we should also make a special note here, that is, it is not recommended to stop spraying the led high-pole lamp, because the spraying process is slightly worse-such as The plastic powder is of poor quality or the baking temperature is too high or too low. These factors will cause the surface of the rod to explode. Although this kind of situation does not affect the application, it seriously affects the appearance.