Add: No.225, Tanshu Rd, Ninghai, Ningbo City, Zhejiang Province, China
Tel: 0086 574-65358238
Tel: 0086 574-83558067
Tel: 0086 574-65539858
Fax: 0086 574-65570158
Do you know how to install the street lamp correctly? W […]
Do you know how to install the street lamp correctly? What are the precautions when installing LED street lamps.
What do you want to know about the installation of LED streetlights.
How to install LED street light source?
First of all, let's take a look at the installation of LED street light source. When installing LED street light source, we must distinguish the identification. The light source used for solar lamp is usually DC 12V or 24V voltage. When installing, the voltage and power must be distinguished, and the matched light source must be used. Due to different light source power and different lighting time, wiring must be in strict accordance with the corresponding wiring diagram; since each lighting system is an independent work unit, it is normal to have a slight difference in switching on and off the lights. When replacing the light source, pay attention to the size of the light source, and do not replace products with different power models. Let's take a look at the precautions in the process of installing LED street lamps.
Notes on installation of LED street lamp
1. Lighting installation and wiring must be carried out under power failure.
2. The power line joint must be insulated and waterproof.
3. When the power cover is opened, it shall not be electrified to prevent electric shock.
4. The glue in the lamp shall not be removed at will to prevent the insulation and heat dissipation.
The above is about the installation of LED streetlights in this process should pay attention to the relevant matters, if there are still relevant instructions on the installation of LED street lamps, you are welcome to inquire.